Report item
Item specifics
  • Brand Name: TOWE
  • Model Number: AP-CoaxN-CATV/S
Product Description

TOWE AP TV/S BNC connector F / M, the video signal protection signal SPD Video Signal SPD BNC Port 10kA COAX TV surge arrestor

 


 

Products Description      
AP TV/S,AP CATV/S,AP TV/16S video communication and television series Surge Protector

Products Application                                      
Applied to lightning region LPZ1-LPZ2 partition interface, AP TV/S applied to coaxial data and video signals protected. AP CATV/S to 16 coaxial protection of data and video signals, 19 "standard rack-mounted, AP CATV/S system specifically for radio and television signal receiving device antenna design

Products Type
AP TV/S,AP CATV/S,AP TV/16S

Products Introduction

AP TV/S,AP CATV/S,AP TV/16S of video communications and television system lightning surge protector is based on standard IEC communications products designed specifically for surge protection of video communications systems and television systems. Products using advanced technology and superior surge protection lightning protection devices carefully made, not only to provide high energy and low energy coarse-level protection to shield and protect the fine wire conductors, and provide shielding layer and the core wire of a conductor to ground mold protection.


 

 AP TV/S,AP CATV/S Schematics

 AP TV/16S Schematics

AP TV/S 

 

 AP CATV/S

AP TV/16S

 
      

 

 

Size Chart



AP 
TV/S,AP CATV/S


AP TV/16S

Technical Data

 

Type

 

AP TV/S
AP CATV/16S

AP TV/16S

Interface Type

Input

BNC/F

F/F

Output

BNC/F

F/F

Characteristic impedance

Z0

75Ω

The maximum continuous operating voltage

Uc

6V

55V

Insertion Loss

 

0.5dB

1.4dB

VSWR

VSWR

≤1.2

≤1.2

Nominal discharge current (8/20μs): Core - Shield / core - ground

In

5kA

Max. discharge current (8/20μs): Core - shielding layer / core - ground

Imax

10kA

Voltage protection level (8/20μs): Core - shielding layer / core - ground

Up

≤15V/≤300V

≤80V/≤300V

Responce Time

tA

<10ns

Operation Temperature

T

- 40degree~+ 85degree

Protect Level

 

IP20

 

 

 

Applications

AP TV / S coaxial video coaxial surge protectors for protection of data and video signals, including Ethernet coaxial communication signal surge protection devices, monitoring equipment, 10M Thick and thin cable.

AP TV/16S to 16 coaxial protection of data and video signals, 19 "standard rack-mounted, providing comprehensive protection and seamless connectivity for video matrix and multi-channel video signal occupies only 1U of valuable rack space.

 AP CATV / S radio and television antenna signal surge protection system is designed for radio and television system antenna signal receiving device designed to protect the system from radio and television antenna conduction or induction from lightning and damage caused by power surges.

Surge protection applies to radio and television system antenna signal reception equipment, including surge protection terrestrial radio and television signals, closed-circuit radio and television signals and satellite radio and television signal receiving system, the frequency range covering almost all commonly used radio, television and satellite signal receiving system.

Product Installation

Integrated multi-stage surge protection, lightning can be used for regional LPZ1-LPZ2 partition interface, which can be easily connected in series access line, pay attention when installing the cables out of the direction of the alignment should be separated to avoid the emergence of a secondary coupling surge. There are "IN" and "OUT" sign. "IN" is always a non-protected side, and indicate the direction of voltage that may arise over the protection side "OUT" points to the protected area or equipment grounding conductor by equipotential connections should be installed as close to the equipment to be protected, and with the shortest ground paths. Ground path should be as short as possible, no longer than 1.5 meters. TTS-CoaxB-TV / S and TTS-CoaxN-CATV / S can be easily installed near the equipment side, TTS-CoaxB-TV/16S can be installed in standard 19-inch rack, occupying only 1U of space. During the installation will also be required to confirm whether the pin with a surge protector communication communications equipment used to protect the feet to match, or to change the wiring at the interface that jumper.

Product Maintenance

Should be checked regularly work surge protector, because if we find the cause of the surge protector reduces system transmission performance or signal interruption, the user is prompted lapsed protection circuit protector installed in the electronic device loses its protective effect downstream users must replace the protector immediately.

 

 

 

Test Report


 

Order Information

Item no.

Type

Specification

*30024

AP TV/S

BNC connector F / M, the video signal protection

30025

AP CATV/S

F interface F / F, TV antenna signal protection

30034

AP TV/16S

BNC connector F / M, 16-way video matrix signal protection

 

 

 345

TOWE AP TV/S BNC connector F / M, the video signal protection signal SPD surge arrestor

 

 

Packaging Details
  • Unit Type: piece
  • Package Weight: 0.1kg (0.22lb.)
  • Package Size: 15cm x 8cm x 15cm (5.91in x 3.15in x 5.91in)
Shipping
Calculate your shipping cost by country/region and quantity.
Quantity: Ship to:
Packaging Details
  • Unit Type: piece
  • Package Weight: 0.1kg (0.22lb.)
  • Package Size: 15cm x 8cm x 15cm (5.91in x 3.15in x 5.91in)
Payment
We support the following payment methods. All payments made on AliExpress are processed by Alipay.